This information is for educational purposes only. Always consult a healthcare professional. Learn more

Potassium Chloride, Dextrose Monohydrate

Prescription

Brand names: Potassium Chloride

Dosage Form
Injection
Route
INTRAVENOUS

About This Medication

11 DESCRIPTION Potassium Chloride in 5% Dextrose Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in a single-dose container for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1 . Table 1 * Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. ** Size (mL) Composition (g/L) Ionic Concentration (mEq/L) Caloric Content (kcal/L) Potassium Chloride in 5% Dextrose Injection, USP **Dextrose Hydrous, USP Potassium Chloride, USP (KCl) *Osmolarity (mOsmol/L) (calc.) pH Potassium Chloride mEq Potassium 10 mEq 1000 50 0.75 272 4.5 (3.5 to 6.5) 10 10 170 20 mEq 1000 50 1.5 293 4.5 (3.5 to 6.5) 20 20 170 D-Glucose monohydrate Dextrose is derived from corn. The flexible plastic container is fabricated from a specially formulated nonplasticized, film containing polypropylene and thermoplastic elastomers ( free flex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. Structural Formula

Active Ingredients

Ingredient Strength
Dextrose Monohydrate -
Potassium Chloride -

Indications & Usage

1 INDICATIONS AND USAGE Potassium Chloride in 5% Dextrose Injection is indicated as a source of water, electrolytes and calories. Potassium Chloride in 5% Dextrose Injection is indicated as a source of water, electrolytes and calories. ( 1 )

How It Works

12.1 Mechanism of Action Potassium Chloride in 5% Dextrose Injection is a source of water, electrolytes and calories. It is capable of inducing diuresis depending on the clinical condition of the patient.

Dosage & Administration

2 DOSAGE AND ADMINISTRATION Only for intravenous infusion. ( 2.1 , 5.2 ) See full prescribing information for information on preparation, administration, dosing considerations and instructions for use. ( 2.1 , 2.2 , 2.3 ) 2.1 Important Administration Instructions Potassium Chloride in 5% Dextrose Injection is only for intravenous infusion [see Warnings and Precautions ( 5.2 )] . For patients receiving Potassium Chloride in 5% Dextrose Injection at greater than maintenance rates, frequent monitoring of serum potassium concentrations and serial electrocardiograms (ECGs) are recommended. The osmolarity of 10 mEq Potassium Chloride in 5% Dextrose Injection is 272 mOsmol/L (calc). The osmolarity of 20 mEq Potassium Chloride in 5% Dextrose is 293 mOsmol/L (calc). Peripheral administration is generally acceptable; however; consider central vein administration if there is peripheral vein irritation, phlebitis, and/or associated pain. Do not administer Potassium Chloride in 5% Dextrose Injection simultaneously with blood products through the same administration set because of the possibility of pseudo agglutination or hemolysis. To prevent air embolism, use a non-vented infusion set or close the vent on a vented set, avoid multiple connections, do not connect flexible containers in series, fully evacuate residual gas in the container prior to administration, do not pressurize the flexible container to increase flow rates, and if administration is controlled by a pumping device, turn off pump before the container runs dry. Prior to infusion, visually inspect the solution for particulate matter. The solution should be clear and there should be no precipitates. Do not administer unless solution is clear and container is undamaged. Use of a final filter is recommended during administration of parenteral solutions, where possible. 2.2 Recommended Dosage The infusion rate and volume depends on the age, weight, clinical and metabolic conditions of the patient and concomitant therapy. Electrolyte supplementation may be indicated according to the clinical needs of the patient. The administration rate should be governed, especially for premature infants with low birth weight, during the first few days of therapy, by the patient's tolerance to dextrose. Increase the infusion rate gradually as indicated by frequent monitoring of blood glucose concentrations [see Warnings and Precautions ( 5.1 ), Use in Specific Populations ( 8.4 )] . 2.3 Instructions for Use Check flexible container solution composition, lot number, and expiry date. Do not remove solution container from its overwrap until immediately before use. Use sterile equipment and aseptic technique. Flexible Plastic Container ( free flex ® bag) To Open Turn solution container over so that the text is face down. Using the pre-cut corner tabs, peel open the overwrap and remove solution container. Check the solution container for leaks by squeezing firmly. If leaks are found, or if the seal is not intact, discard the solution. Check to ensure the solution is clear and there are no precipitates. Discard if there is a color change and/or the appearance of precipitates. Preparation for Administration Immediately before inserting the infusion set, break off BLUE Infusion Port Cap with the arrow pointing away from container. Use a non-vented infusion set or close the air-inlet on a vented set. Close the roller clamp of the infusion set. Hold the base of BLUE Infusion Port. Insert spike through BLUE Infusion Port by rotating wrist slightly until the spike is inserted. NOTE: See full directions accompanying administration set. Suspend solution container from hanger hole. To Add Medication Additives may be incompatible. Complete information is not available. Do not use additives known or determined to be incompatible. Before adding a substance or medication, verify that it is soluble and/or stable in this drug product and that the pH range of this drug product is appropriate. Consult with pharmacist, if available. If, in the informed judgment of the healthcare provider, it is deemed advisable to introduce additives, use aseptic technique. When introducing additives, consult the instructions for use of the medication to be added and other relevant literature. To Add Medication Prior to Solution Administration Identify WHITE Additive Port with arrow pointing toward container. Immediately before injecting additives, break off WHITE Additive Port Cap with the arrow pointing toward container. Hold base of WHITE Additive Port horizontally. Prepare medication site Insert an 18 to 23 gauge needle horizontally through the center of WHITE Additive Port's septum and inject additives. Mix container contents thoroughly. For high density medication such as potassium chloride, squeeze ports while ports are upright and mix thoroughly. After addition, check to ensure the solution is clear and there are no precipitates. Discard if there is a color change and/or the appearance of precipitates. To Add Medication During Solution Administration Close the clamp on the set Identify WHITE Additive Port with arrow pointing toward container Immediately before injecting additives, if the Cap has not been broken off, break off WHITE Additive Port cap with the arrow pointing toward container. Hold base of WHITE Additive Port horizontally. Prepare medication site. Using a syringe with an 18 to 23 gauge needle, horizontally insert through the center of WHITE Additive Port's septum and inject additives. Remove container from IV pole and/or turn to an upright position. Mix container contents thoroughly. After addition, check to ensure the solution is clear and there are no precipitates. Discard if there is a color change and/or the appearance of precipitates. Using aseptic technique, repeat steps 4-7 as necessary. Return container to in use position and continue administration. Storage Use promptly; do not store solutions containing additives. Single-dose container. Discard any unused portion.

Side Effects Overview

6 ADVERSE REACTIONS The following adverse reactions associated with the use of Potassium Chloride in 5% Dextrose Injection were identified in post marketing reports. Because these reactions were reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure. The following clinically significant adverse reactions are described elsewhere in the labeling: Hypersensitivity reactions : including anaphylaxis and chills [see Warnings and Precautions ( 5.1 )] . Hyperkalemia, including cardiac arrest, as a manifestation [see Warnings and Precautions ( 5.2 )] Hyponatremia and hyponatremic encephalopathy [see Warnings and Precautions ( 5.4 )] Hypokalemia [see Warnings and Precautions ( 5.5 )] Hypervolemia [see Warnings and Precautions ( 5.6 )] Injection site reactions : infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation, infusion site rash, infusion site pain, infusion site vesicles, infusion site pruritus, pyrexia and chills Adverse reactions include electrolyte imbalances, hyperglycemia, and hypervolemia and injection site reactions. ( 6 ) To report SUSPECTED ADVERSE REACTIONS, contact Fresenius Kabi USA, LLC at 1-800-551-7176 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch .

Warnings & Precautions

Contraindications

Frequently Asked Questions

1 INDICATIONS AND USAGE Potassium Chloride in 5% Dextrose Injection is indicated as a source of water, electrolytes and calories. Potassium Chloride in 5% Dextrose Injection is indicated as a source of water, electrolytes and calories. ( 1 )

2 DOSAGE AND ADMINISTRATION Only for intravenous infusion. ( 2.1 , 5.2 ) See full prescribing information for information on preparation, administration, dosing considerations and instructions for use. ( 2.1 , 2.2 , 2.3 ) 2.1 Important Administration Instructions Potassium Chloride in 5% Dextrose Injection is only for intravenous infusion [see Warnings and Precautions ( 5.2 )] . For patients receiving Potassium Chloride in 5% Dextrose Injection at greater than maintenance rates, frequent monitoring of serum potassium concentrations and serial …

5 WARNINGS AND PRECAUTIONS Hypersensitivity Reactions : monitor for signs and symptoms and discontinue infusion if reactions occur. ( 5.1 ) Hyperkalemia : May result in cardiac arrhythmias. Avoid use in patients with, or at risk for, hyperkalemia. If use cannot be avoided, use a product with a low amount of potassium chloride, infuse slowly and monitor serum potassium concentrations and ECGs. ( 5.2 ) Hyperglycemia or Hyperosmolar Hyperglycemic State : Monitor blood glucose and administer insulin as needed. ( …

4 CONTRAINDICATIONS Potassium Chloride in 5% Dextrose Injection is contraindicated in patients with: known hypersensitivity to potassium chloride and/or dextrose [see Warnings and Precautions 5.1 )] clinically significant hyperkalemia [see Warnings and Precautions ( 5.2 )] clinically significant hyperglycemia [see Warnings and Precautions ( 5.3 )] Known hypersensitivity to potassium chloride or dextrose ( 4 , 5.1 ) Clinically significant hyperkalemia ( 4 , 5.2 ) Clinically significant hyperglycemia ( 4 , 5.3 )

Potassium Chloride, Dextrose Monohydrate is a prescription medication. You will need a valid prescription from a licensed healthcare provider.

Similar Injection Products

Browse all Injection products →

References & Data Sources

Medical Disclaimer

The information on this page is intended for educational purposes only and should not be used as a substitute for professional medical advice, diagnosis, or treatment.

Always seek the advice of your physician or other qualified health provider with any questions you may have regarding a medical condition or medication.

Data sources: DailyMed (NLM), openFDA, MFDS

Medical Disclaimer

This content is for educational and informational purposes only. It is not a substitute for professional medical advice, diagnosis, or treatment. Always consult a qualified healthcare provider before making medication decisions.

Data sources: ChEMBL, PubChem, DailyMed.