ข้อมูลนี้มีวัตถุประสงค์เพื่อการศึกษาเท่านั้น ควรปรึกษาผู้เชี่ยวชาญด้านสุขภาพเสมอ เรียนรู้เพิ่มเติม

3% Sodium Chloride

Prescription

ชื่อทางการค้า: 3% Sodium Chloride

รูปแบบยา
Injection
เส้นทางการให้ยา
INTRAVENOUS
ผู้ผลิต
Becton Dickinson and Company

About This Medication

DESCRIPTION: 3% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. The pH may have been adjusted with hydrochloric acid. It contains no antimicrobial agents. Composition, ionic concentration, osmolarity, and pH are shown in Table 1 . Table 1. *Normal physiological osmolarity range is approximately 280 to 310 mOsmol/L. Size (mL) Composition (g/L) Ionic Concentration (mEq/L) *Osmolarity (mOsmol/L) (calc) pH Sodium Chloride, USP (NaCl) Sodium Chloride 3% Sodium Chloride Injection, USP 500 30 513 513 1,027 5.0 (4.5 to 7.0) The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (free flex ® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

ส่วนประกอบออกฤทธิ์

ส่วนประกอบ ความแรง
Sodium Chloride -

ข้อบ่งใช้และการใช้งาน

INDICATIONS AND USAGE: 3% Sodium Chloride Injection is indicated as a source of water and electrolytes.

ขนาดยาและวิธีการให้ยา

DOSAGE AND ADMINISTRATION: As directed by a physician. Dosage, rate, and duration of administration are to be individualized and depend upon the indication for use, the patient's age, weight, clinical condition, concomitant treatment, and on the patient's clinical and laboratory response to treatment. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration whenever solution and container permit. Use of a final filter is recommended during administration of all parenteral solutions, where possible. Do not administer unless solution is clear and seal is intact. All injections in flexible plastic containers are intended for intravenous administration using sterile and nonpyrogenic equipment. Additives may be incompatible. Complete information is not available. Those additives known to be incompatible should not be used. Consult with pharmacist, if available. If, in the informed judgment of the physician, it is deemed advisable to introduce additives, use aseptic technique. Mix thoroughly when additives have been introduced. Do not store solutions containing additives. After opening the container, the contents should be used immediately and should not be stored for a subsequent infusion. Do not reconnect any partially used containers. Discard any unused portion.

Side Effects Overview

ADVERSE REACTIONS: Post-Marketing Adverse Reactions The following adverse reactions have not been reported with 3% Sodium Chloride Injection but may occur: hyperchloremia hyperchloremic metabolic acidosis, hypersensitivity/infusion reactions, including hypotension, pyrexia, tremor, chills, urticaria, rash, and pruritus, Infusion site reactions, such as thrombosis, phlebitis, irritation, infusion site erythema, injection site streaking, burning sensation, infusion site urticaria. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures, and save the remainder of the fluid for examination if deemed necessary.

คำเตือนและข้อควรระวัง

ข้อห้ามใช้

Frequently Asked Questions

INDICATIONS AND USAGE: 3% Sodium Chloride Injection is indicated as a source of water and electrolytes.

DOSAGE AND ADMINISTRATION: As directed by a physician. Dosage, rate, and duration of administration are to be individualized and depend upon the indication for use, the patient's age, weight, clinical condition, concomitant treatment, and on the patient's clinical and laboratory response to treatment. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration whenever solution and container permit. Use of a final filter is recommended during administration of all parenteral solutions, where possible. Do not …

WARNINGS: Hypersensitivity/infusion reactions, including hypotension, pyrexia, tremor, chills, urticaria, rash, and pruritus may occur with 3% Sodium Chloride Injection. Stop the infusion immediately if signs or symptoms of a hypersensitivity reaction develop, such as tachycardia, chest pain, dyspnea and flushing. Appropriate therapeutic countermeasures must be instituted as clinically indicated. Depending on the volume and rate of infusion, the intravenous administration of 3% Sodium Chloride Injection can cause fluid and/or solute overloading resulting in dilution of serum electrolyte concentrations, overhydration/hypervolemia, congested …

CONTRAINDICATIONS: None known.

3% Sodium Chloride is a prescription medication. You will need a valid prescription from a licensed healthcare provider.

Similar Injection Products

Browse all Injection products →

References & Data Sources

ข้อจำกัดความรับผิดชอบทางการแพทย์

ข้อมูลในหน้านี้มีวัตถุประสงค์เพื่อการศึกษาเท่านั้น และไม่ควรใช้แทนคำแนะนำทางการแพทย์จากผู้เชี่ยวชาญ การวินิจฉัย หรือการรักษา

ควรขอคำแนะนำจากแพทย์หรือผู้ให้บริการด้านสุขภาพที่มีคุณสมบัติอื่นๆ เสมอ สำหรับคำถามใดๆ ที่คุณมีเกี่ยวกับภาวะทางการแพทย์หรือยา

แหล่งข้อมูล: DailyMed (NLM), openFDA, MFDS

Medical Disclaimer

This content is for educational and informational purposes only. It is not a substitute for professional medical advice, diagnosis, or treatment. Always consult a qualified healthcare provider before making medication decisions.

Data sources: ChEMBL, PubChem, DailyMed.