Dextrose Monohydrate, Sodium Lactate, Potassium Chloride, Magnesium Chloride, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate

Prescription

Tên thương mại: Ionosol MB and Dextrose

Dạng bào chế

Injection

Đường dùng

INTRAVENOUS

Nhà sản xuất

ICU Medical Inc.

About This Medication

DESCRIPTION Ionosol MB and 5% Dextrose Injection (Multiple Electrolytes and 5% Dextrose Injection Type 1, USP) is a sterile, nonpyrogenic solution designed for intravenous administration. The solution is formulated to provide fluid and electrolytes for treatment of dehydration and acidosis. Each 100 mL contains dextrose, hydrous 5 g; sodium lactate, anhydrous 260 mg; potassium chloride 141 mg; magnesium chloride, hexahydrate 30 mg; monobasic potassium phosphate, anhydrous 15 mg; and monobasic sodium phosphate, monohydrate 25 mg. Each liter contains 25 mEq sodium (Na + ); 20 mEq potassium (K + ); 3 mEq magnesium (Mg ++ ); 22 mEq chloride (Cl¯); 3 mM of phosphate (PO 4 ≡); and 23 mEq lactate (CH 3 CH(OH)COO¯). The electrolyte content is hypotonic (100 mOsmol/L) in relation to the extracellular fluid (1pprox.. 280 mOsmol/L). The osmolarity for the total solution is 352 mOsmol/L (calc.). May contain hydrochloric acid for pH adjustment. pH is 5.0 (4.0 to 6.5). Dextrose, USP, hydrous is chemically designated C 6 H 12 O 6 • H 2 O (D-glucose, monohydrate), a hexose sugar freely soluble in water. Dextrose, hydrous has the following structural formula: Magnesium Chloride, USP, hexahydrate is chemically designated MgCl 2 • 6H 2 O, colorless flakes or crystals very soluble in water. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water. Monobasic Potassium Phosphate, NF, anhydrous is chemically designated KH 2 PO 4 , colorless crystals or white granular powder freely soluble in water. Sodium Lactate, USP is chemically designated CH 3 CH(OH)COONa, a 60% aqueous solution miscible in water. Monobasic Sodium Phosphate, USP, monohydrate is chemically designated NaH 2 PO 4 • H 2 O, white crystals or granules freely soluble in water. Water for Injection, USP is chemically designated H 2 O. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions inside the plastic container also can leach out certain of their chemical components in very small amounts before the expiration period is attained. However, the safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. structural formula dextrose

Hoạt chất

Thành phần	Hàm lượng
Dextrose Monohydrate	-
Magnesium Chloride	-
Monobasic Potassium Phosphate	-
Potassium Chloride	-
Sodium Lactate	-
Sodium Phosphate, Monobasic, Monohydrate	-

Chỉ định & Cách dùng

INDICATIONS AND USAGE Ionosol MB and 5% Dextrose Injection is indicated for intravenous administration to infants for treatment of dehydration, acidosis, diarrhea, and burns, but only after administration of an initial priming solution: 15 mL of 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight. In adults, Ionosol MB and 5% Dextrose Injection is indicated postoperatively for intravenous fluid and electrolyte maintenance therapy, with a small amount of carbohydrate calories for reducing catabolism of endogenous protein reserves.

Liều dùng & Cách dùng

DOSAGE AND ADMINISTRATION The dose is dependent upon the age, weight and clinical condition of the patient. In infants, Ionosol MB and 5% Dextrose Injection is given only after administration of an initial priming solution: 15 mL of half isotonic saline in 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight, administered to small infants at a maximum rate of 0.8 mL/minute. Infants typically tolerate not more than 150 to 200 mL of Ionosol MB and 5% Dextrose Injection per kg body weight/day. As reported in the literature, the dosage and constant infusion rate of intravenous dextrose must be selected with caution in pediatric patients, particularly neonates and low birth weight infants, because of the increased risk of hyperglycemia/hypoglycemia. In adults, intravenous infusions of Ionosol MB and 5% Dextrose Injection are given postoperatively, at a rate not greater than 4 mL/minute. Drug Interactions Additives may be incompatible. Consult with pharmacist, if available. When introducing additives, use aseptic technique, mix thoroughly and do not store. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration. See PRECAUTIONS . INSTRUCTIONS FOR USE To Open: Tear outer wrap at notch and remove solution container. Some opacity of the plastic due to moisture absorption during sterilization process may be observed. This is normal and does not affect the solution quality or safety. The opacity will diminish gradually. If supplemental medication is desired, follow directions below before preparing for administration. To Add Medication Prepare additive port. Using aseptic technique and an additive delivery needle of appropriate length, puncture resealable additive port at target area, inner diaphragm and inject. Withdraw needle after injecting medication. The additive port may be protected by covering with an additive cap. Mix container contents thoroughly. To Administer Attach administration set per manufacturer's instructions. Regulate rate of administration per institutional policy. WARNING: Do not use flexible container in series connections.

Side Effects Overview

ADVERSE REACTIONS Reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.

Cảnh báo & Thận trọng

WARNINGS Solutions which contain potassium ions should be used with great care, if at all, in patients with hyperkalemia, severe renal failure and in conditions in which potassium retention is present. Solutions containing sodium ions should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency and in clinical states in which there exists edema with sodium retention. In patients with diminished renal function, administration of solutions containing sodium or potassium ions may result in sodium or potassium retention. Solutions containing lactate ions should be used with great care, if at all, in patients with metabolic or respiratory alkalosis. The administration of lactate ions should be done with great care in those conditions in which there is an increased level or an impaired utilization of lactate ions, such as severe hepatic insufficiency. The intravenous administration of Ionosol MB and 5% Dextrose Injection can cause fluid and/or solute overloading resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema. The risk of dilutional states is inversely proportional to the electrolyte concentrations of administered parenteral solutions. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentrations of such solutions.

Chống chỉ định

CONTRAINDICATIONS Solutions containing potassium are contraindicated in diseases where high potassium levels may be encountered.

Frequently Asked Questions

INDICATIONS AND USAGE Ionosol MB and 5% Dextrose Injection is indicated for intravenous administration to infants for treatment of dehydration, acidosis, diarrhea, and burns, but only after administration of an initial priming solution: 15 mL of 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight. In adults, Ionosol MB and 5% Dextrose Injection is indicated postoperatively for intravenous fluid and electrolyte maintenance therapy, with a small amount of carbohydrate calories for reducing catabolism of endogenous protein reserves.

DOSAGE AND ADMINISTRATION The dose is dependent upon the age, weight and clinical condition of the patient. In infants, Ionosol MB and 5% Dextrose Injection is given only after administration of an initial priming solution: 15 mL of half isotonic saline in 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight, administered to small infants at a maximum rate of 0.8 mL/minute. Infants typically tolerate not more than 150 to 200 mL of Ionosol MB and 5% Dextrose Injection …

WARNINGS Solutions which contain potassium ions should be used with great care, if at all, in patients with hyperkalemia, severe renal failure and in conditions in which potassium retention is present. Solutions containing sodium ions should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency and in clinical states in which there exists edema with sodium retention. In patients with diminished renal function, administration of solutions containing sodium or potassium ions may …

CONTRAINDICATIONS Solutions containing potassium are contraindicated in diseases where high potassium levels may be encountered.

Dextrose Monohydrate, Sodium Lactate, Potassium Chloride, Magnesium Chloride, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate is a prescription medication. You will need a valid prescription from a licensed healthcare provider.

Similar Injection Products

Bacteriostatic Sodium Chloride

Dexmedetomidine Hydrochloride

Dactinomycin

Cefazolin Sodium

Dacarbazine

Bacteriostatic Water

Browse all Injection products →

References & Data Sources

• DailyMed — Dextrose Monohydrate, Sodium Lactate, Potassium Chloride, Magnesium Chloride, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate drug label (National Library of Medicine)
• openFDA — Dextrose Monohydrate, Sodium Lactate, Potassium Chloride, Magnesium Chloride, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate label data (U.S. Food & Drug Administration)
• RxNorm — RXCUI 800644 (NLM Normalized Drug Names)
• NDC Directory — Dextrose Monohydrate, Sodium Lactate, Potassium Chloride, Magnesium Chloride, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate (FDA National Drug Code)

Tuyên bố miễn trách nhiệm y tế

Thông tin trên trang này chỉ nhằm mục đích giáo dục và không nên được sử dụng thay thế cho lời khuyên y tế chuyên nghiệp, chẩn đoán hoặc điều trị.

Luôn tìm kiếm lời khuyên của bác sĩ hoặc nhà cung cấp dịch vụ y tế có chuyên môn khác đối với bất kỳ câu hỏi nào bạn có về tình trạng bệnh hoặc thuốc.

Nguồn dữ liệu: DailyMed (NLM), openFDA, MFDS