Sodium Phosphates

Prescription

Tên thương mại: SODIUM PHOSPHATES

Dạng bào chế

Injection

Đường dùng

INTRAVENOUS

Nhà sản xuất

Caplin Steriles Limited

About This Medication

DESCRIPTION Sodium phosphates injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted . Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO 4 . It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH 2 PO 4 •H 2 O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na 2 HPO 4 , colorless or white granular salt freely soluble in water.

Hoạt chất

Thành phần	Hàm lượng
Sodium Phosphate, Dibasic, Heptahydrate	-
Sodium Phosphate, Monobasic, Monohydrate	-

Chỉ định & Cách dùng

INDICATIONS & USAGE Sodium phosphates injection, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na + 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.

Liều dùng & Cách dùng

DOSAGE & ADMINISTRATION Sodium phosphates injection, 3 mM P/mL is administered intravenously only after dilution and thorough mixing in a larger volume of fluid. The dose and rate of administration are dependent upon the individual needs of the patient. Serum sodium, phosphorus and calcium levels should be monitored as a guide to dosage. Using aseptic technique, all or part of the contents of one or more vials may be added to other intravenous fluids to provide any desired number of millimoles (mM) of phosphorus. In patients on total parenteral nutrition, approximately 12 to 15 mM of phosphorus (equivalent to 372 to 465 mg elemental phosphorus) per liter bottle of TPN solution containing 250 g dextrose is usually adequate to maintain normal serum phosphorus, though larger amounts may be required in hypermetabolic states. The amount of sodium and phosphorus which accompanies the addition of sodium phosphate also should be kept in mind, and if necessary, serum sodium levels should be monitored. The suggested dose of phosphorus for infants receiving TPN is 1.5 to 2 mM P/kg/day. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. See PRECAUTIONS .

Side Effects Overview

ADVERSE REACTIONS Adverse reactions involve the possibility of phosphorus intoxication. Phosphorus intoxication results in a reduction of serum calcium and the symptoms are those of hypocalcemic tetany. See WARNINGS . To report SUSPECTED ADVERSE REACTIONS, contact Caplin Steriles Limited at 1-866-978-6111 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

Cảnh báo & Thận trọng

WARNINGS Sodium phosphates injection, 3 mM P/mL must be diluted and thoroughly mixed before use. To avoid phosphorus intoxication, infuse solutions containing sodium phosphate slowly. Infusing high concentrations of phosphorus may result in a reduction of serum calcium and symptoms of hypocalcemic tetany. Calcium levels should be monitored. Solutions containing sodium ions should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency and in clinical states in which there exists edema with sodium retention. In patients with diminished renal function, administration of solutions containing sodium ions may result in sodium retention. WARNING: This product contains aluminum that may be toxic. Aluminum may reach toxic levels with prolonged parenteral administration if kidney function is impaired. Premature neonates are particularly at risk because their kidneys are immature, and they require large amounts of calcium and phosphate solutions, which contain aluminum. Research indicates that patients with impaired kidney function, including premature neonates, who receive parenteral levels of aluminum at greater than 4 to 5 mcg/kg/day accumulate aluminum at levels associated with central nervous system and bone toxicity. Tissue loading may occur at even lower rates of administration.

Chống chỉ định

CONTRAINDICATIONS Sodium phosphate is contraindicated in diseases where high phosphorus or low calcium levels may be encountered, and in patients with hypernatremia.

Frequently Asked Questions

INDICATIONS & USAGE Sodium phosphates injection, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na + 4 mEq/mL) must be calculated into total electrolyte dose …

DOSAGE & ADMINISTRATION Sodium phosphates injection, 3 mM P/mL is administered intravenously only after dilution and thorough mixing in a larger volume of fluid. The dose and rate of administration are dependent upon the individual needs of the patient. Serum sodium, phosphorus and calcium levels should be monitored as a guide to dosage. Using aseptic technique, all or part of the contents of one or more vials may be added to other intravenous fluids to provide any desired number of …

WARNINGS Sodium phosphates injection, 3 mM P/mL must be diluted and thoroughly mixed before use. To avoid phosphorus intoxication, infuse solutions containing sodium phosphate slowly. Infusing high concentrations of phosphorus may result in a reduction of serum calcium and symptoms of hypocalcemic tetany. Calcium levels should be monitored. Solutions containing sodium ions should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency and in clinical states in which there exists edema with …

CONTRAINDICATIONS Sodium phosphate is contraindicated in diseases where high phosphorus or low calcium levels may be encountered, and in patients with hypernatremia.

Sodium Phosphates is a prescription medication. You will need a valid prescription from a licensed healthcare provider.

Similar Injection Products

Teprotumumab

Dexrazoxane For Injection

Pegfilgrastim-Apgf

Leucine, Phenylalanine, Lysine, Methionine, …

Basiliximab

Midazolam In Sodium Chloride

Browse all Injection products →

References & Data Sources

• DailyMed — Sodium Phosphates drug label (National Library of Medicine)
• openFDA — Sodium Phosphates label data (U.S. Food & Drug Administration)
• NDC Directory — Sodium Phosphates (FDA National Drug Code)

Tuyên bố miễn trách nhiệm y tế

Thông tin trên trang này chỉ nhằm mục đích giáo dục và không nên được sử dụng thay thế cho lời khuyên y tế chuyên nghiệp, chẩn đoán hoặc điều trị.

Luôn tìm kiếm lời khuyên của bác sĩ hoặc nhà cung cấp dịch vụ y tế có chuyên môn khác đối với bất kỳ câu hỏi nào bạn có về tình trạng bệnh hoặc thuốc.

Nguồn dữ liệu: DailyMed (NLM), openFDA, MFDS