Diese Informationen dienen ausschließlich zu Bildungszwecken. Konsultieren Sie stets einen Angehörigen der Gesundheitsberufe. Mehr erfahren

Dextrose Monohydrate

Prescription

Handelsnamen: DEXTROSE

Darreichungsform
Injection
Applikationsweg
INTRAVENOUS

About This Medication

11 DESCRIPTION Dextrose Injection 70%, USP is a clear, sterile, nonpyrogenic, hypertonic solution of Dextrose, USP in Water for Injection in a flexible plastic container as a Pharmacy Bulk Package. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program. Dextrose Injection is not for direct intravenous infusion [see Dosage and Administration (2.1) ] . The Pharmacy Bulk Package is designed to facilitate admixture or dilution to provide dextrose in various concentrations and is available in a 2000 mL size. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use following admixture or dilution. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Table 1. Contents and Characteristics of Dextrose Injection 70%, USP Strength Fill Volume Amount of Dextrose Hydrous, USP per container kcal Caloric value calculated on the basis of 3.4 kcal/g of dextrose, hydrous per Container Osmolarity (mOsmol per liter) (calc.) Dextrose Injection 70%, USP (0.7 grams/mL) 2000 mL 1400 grams 4760 3530 Dextrose, USP is chemically designated D-glucose, monohydrate (C 6 H 12 O 6 • H 2 O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula: Water for Injection, USP is chemically designated H 2 O. Dextrose Injection 70%, USP contains no more than 25 mcg/L of aluminum. Dextrose is derived from corn. Structural formula of Dextrose Hydrous, USP

Wirkstoffe

Wirkstoff Stärke
Dextrose Monohydrate -

Indikationen und Anwendung

1 INDICATIONS AND USAGE Dextrose Injection is indicated as source of calories and fluid replenishment when mixed with amino acids or other compatible intravenous fluids for patients requiring parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient or contraindicated. Dextrose Injection is indicated as a source of calories when mixed with amino acids or other compatible intravenous fluids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient or contraindicated. ( 1 )

So funktioniert es

12.1 Mechanism of Action Dextrose Injection is used to supplement nutrition by providing glucose parenterally. Dextrose is oxidized to carbon dioxide and water, yielding energy.

Dosierung und Verabreichung

2 DOSAGE AND ADMINISTRATION • Pharmacy Bulk Package. Not for direct intravenous infusion. ( 2.1 ) • For slow intravenous infusion only into a: ( 2.2 ) o Central vein, if final dextrose concentration is greater than 5% or osmolality is greater than 900 mOsm/L approximately. o Peripheral vein, if final dextrose concentration 5% or less and osmolality is less than 900 mOsm/L approximately. • Individualize dosage based on the patient’s clinical condition, body weight, nutritional/fluid requirements, as well as additional energy given orally/enterally. ( 2.3 ) • Discontinue infusion of concentrated dextrose solutions slowly. ( 2.4 ) 2.1 Preparation Instructions Prior to Administration Dextrose Injection is supplied as a pharmacy bulk package for admixing only and is not for direct intravenous infusion. Dextrose Injection is intended for use in the preparation of sterile, intravenous admixtures. Prior to administration, Dextrose Injection must be transferred to a separate PN container , diluted with other compatible intravenous fluids and used as an admixture in PN solutions. • Do not remove from overpouch until ready to use. • Tear protective overwrap at slit and remove solution container. Small amounts of moisture may be found on the solution container from water permeating from inside the container. The amount of permeated water is insufficient to affect the solution significantly. If larger amounts of water are found, the container should be checked for tears or leaks. • Inspect Dextrose Injection prior to use. Opacity of the container may be observed due to moisture absorption during the sterilization process. This is normal and does not affect the solution quality or safety. The opacity will diminish gradually. Evaluate the following: o If the outlet port protector is damaged, detached, or not present, discard container as solution path sterility may be impaired. o Check for minute leaks by squeezing the inner container firmly. If leaks are found, discard solution as sterility may be impaired. o Do not use unless solution is clear and container is intact. • Because additives may be incompatible, evaluate all additions for compatibility and stability of the resulting preparation. Consult with a pharmacist, if available. If it is deemed advisable to introduce additives, use aseptic technique and mix thoroughly. • Calcium and phosphate ratios must be considered. Excess addition of calcium and phosphate, especially in the form of mineral salts, may result in the formation of calcium phosphate precipitates [see Warnings and Precautions (5.1)] . Preparation for Admixing 1. The Pharmacy Bulk Package is to be used only in a suitable work area such as a laminar flow hood (or an equivalent clean air compounding area). 2. Suspend container from eyelet support. 3. Remove plastic protector from outlet port at bottom of container. 4. Attach solution transfer set. Refer to complete directions accompanying set. Note: The closure shall be penetrated only one time with a suitable sterile transfer device or dispensing set which allows measured dispensing of the contents. 5. The VIAFLEX plastic container should not be written on directly since ink migration has not been investigated. Affix accompanying label for date and time of entry notation. 6. Once container closure has been penetrated, withdrawal of contents should be completed without delay. After initial entry, maintain contents at room temperature (25°C/77°F) and dispense within 4 hours. 2.2 Important Administration Instructions • Dextrose Injection is for admixing use only and is not for direct intravenous infusion . Prior to administration, Dextrose Injection must be diluted with other compatible intravenous fluids and used as an admixture in PN solutions . • To prevent air embolism, use a non-vented infusion set or close the vent on a vented set, avoid multiple connections, do not connect flexible containers in series, fully evacuate residual gas in the container prior to administration, do not pressurize the flexible container to increase flow rates, and if administration is controlled by a pumping device, turn off pump before the container runs dry. • When Dextrose Injection is admixed, the choice of a central or peripheral venous route should depend on the osmolarity of the final infusate. Solutions with an osmolarity of 900 mOsm/L or greater must be infused through a central venous catheter [see Warnings and Precautions (5.4)] . • Prior to infusion, visually inspect the PN solution to ensure precipitates have not formed during the mixing or addition of additives. Discard container if precipitates are observed. • If admixed or infused with lipid emulsion, do not use administration sets and lines that contain di-2-ethylhexyl phthalate (DEHP). Administration sets that contain polyvinyl chloride (PVC) components have DEHP as a plasticizer. 2.3 Dosing Instructions Caution: Dextrose Injection is not for direct intravenous infusion. Prior to administration, Dextrose Injection must be diluted with other compatible intravenous fluids or used as an admixture in PN solutions. Dextrose Injection is a part of the parenteral nutrition (PN) regimen which also includes amino acids, electrolytes, and possibly lipid emulsion. Protein, caloric, fluid and electrolyte requirements all need to be taken into consideration when determining individual patient dosage needs. Individualize the dosage of Dextrose Injection based on the patient’s clinical condition (ability to adequately metabolize dextrose), body weight, nutritional and fluid requirements, as well as additional energy given orally or enterally to the patient. Vitamins and trace elements and other components (including amino acids, electrolytes, and lipid emulsion) can be added to the PN solution to meet nutrient needs and prevent deficiencies and complications from developing. The administration rate should be governed, especially during the first few days of therapy, based on the patient’s tolerance to dextrose. Daily intake of amino acids and dextrose should be increased gradually to the maximum required dose as indicated by frequent determinations of blood glucose levels. In many patients, provision of adequate calories in the form of hypertonic dextrose may require the administration of exogenous insulin to prevent hyperglycemia and glycosuria. 2.4 Discontinuation of Dextrose Injection To reduce the risk of hypoglycemia, a gradual decrease in flow rate in the last hour of infusion should be considered [see Warnings and Precautions (5.2) , Use in Specific Populations (8.4)] .

Side Effects Overview

6 ADVERSE REACTIONS The following adverse reactions associated with the use of Dextrose Injection were identified in clinical trials or postmarketing reports. Because these reactions were reported voluntarily from a population of uncertain size, it is not always possible to estimate their frequency, reliably, or to establish a causal relationship to drug exposure. The following clinically significant adverse reactions are described elsewhere in the labeling: • Pulmonary embolism due to pulmonary vascular precipitates [see Warnings and Precautions (5.1) ] • Hyperglycemia and hyperosmolar hyperglycemic state [see Warnings and Precautions (5.2) ] • Hypersensitivity reactions [see Warnings and Precautions (5.3) ] • Vein damage and thrombosis [see Warnings and Precautions (5.4) ] • H yponatremia and hyponatremic encephalopathy [see Warnings and Precautions (5.5) ] • Risk of infections [see Warnings and Precautions (5.6) ] • Refeeding syndrome [see Warnings and Precautions (5.7) ] • Aluminum toxicity [see Warnings and Precautions (5.9) ] • Hepatobiliary disorders [see Warnings and Precautions (5.8) ] • Risk of parenteral nutrition associated liver disease [see Warnings and Precautions (5.10) ] • Electrolyte imbalance and fluid overload [see Warnings and Precautions (5.11) ] The most common adverse reactions are, hyperglycemia, hypersensitivity reactions, infection both systemic and at the injection site, and vein thrombosis or phlebitis. ( 6 ) To report SUSPECTED ADVERSE REACTIONS, contact Baxter Healthcare at 1-866-888-2472 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

Warnhinweise und Vorsichtsmaßnahmen

Kontraindikationen

Frequently Asked Questions

1 INDICATIONS AND USAGE Dextrose Injection is indicated as source of calories and fluid replenishment when mixed with amino acids or other compatible intravenous fluids for patients requiring parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient or contraindicated. Dextrose Injection is indicated as a source of calories when mixed with amino acids or other compatible intravenous fluids for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient or contraindicated. ( 1 )

2 DOSAGE AND ADMINISTRATION • Pharmacy Bulk Package. Not for direct intravenous infusion. ( 2.1 ) • For slow intravenous infusion only into a: ( 2.2 ) o Central vein, if final dextrose concentration is greater than 5% or osmolality is greater than 900 mOsm/L approximately. o Peripheral vein, if final dextrose concentration 5% or less and osmolality is less than 900 mOsm/L approximately. • Individualize dosage based on the patient’s clinical condition, body weight, nutritional/fluid requirements, as well as …

5 WARNINGS AND PRECAUTIONS • Pulmonary Embolism due to Pulmonary Vascular Precipitates : If signs of pulmonary distress occur, stop the infusion and initiate a medical evaluation. ( 5.1 ) • Hyperglycemia or Hyperosmolar Hyperglycemic State : Monitor blood glucose and administer insulin as needed. ( 5.2 ) • Hypersensitivity Reactions : Monitor for signs and symptoms and discontinue infusion if reactions occur. ( 5.3 ) • Vein Damage and Thrombosis : Administer solutions containing more than 5% dextrose as …

4 CONTRAINDICATIONS The use of Dextrose Injection is contraindicated in patients: • Who are severely dehydrated as hypertonic dextrose solution can worsen the patient’s hyperosmolar state [see Warnings and Precautions (5.2)] . • Known hypersensitivity to dextrose [see Warnings and Precautions (5.3)] . Severe dehydration. ( 4 )

Dextrose Monohydrate is a prescription medication. You will need a valid prescription from a licensed healthcare provider.

Similar Injection Products

Browse all Injection products →

References & Data Sources

Medizinischer Haftungsausschluss

Die Informationen auf dieser Seite dienen ausschließlich zu Bildungszwecken und sollten nicht als Ersatz für professionellen ärztlichen Rat, Diagnose oder Behandlung verwendet werden.

Wenden Sie sich bei Fragen zu einem medizinischen Zustand oder einem Arzneimittel stets an Ihren Arzt oder einen anderen qualifizierten Angehörigen der Gesundheitsberufe.

Datenquellen: DailyMed (NLM), openFDA, MFDS

Medical Disclaimer

This content is for educational and informational purposes only. It is not a substitute for professional medical advice, diagnosis, or treatment. Always consult a qualified healthcare provider before making medication decisions.

Data sources: ChEMBL, PubChem, DailyMed.